Amplifier Morgan Sound X25.2 The Perfect Match for Subwoofer 218 and 221

When it comes to delivering earth-shaking bass for professional audio systems, the Morgan Sound X25.2 amplifier stands out as a powerhouse designed to pair seamlessly with high-performance subwoofers like the Subwoofer 218 and Subwoofer 221. Whether you’re setting up a concert stage, nightclub sound system, or large-scale event, this amplifier’s cutting-edge technology and robust specifications make it an ideal choice. In this article, we’ll explore why the Morgan Sound X25.2 is tailored for these subwoofers, diving into its technical specs, features, and real-world performance.

---

Why Choose the Morgan Sound X25.2 for Subwoofer 218 and 221?

The Morgan Sound X25.2 is a Class TD amplifier engineered for efficiency, power, and precision—qualities that perfectly complement the demands of subwoofers like the 218 and 221. With a maximum output power of 2500W at 8Ω per channel and up to 9000W in bridge mode at 4Ω, this amplifier ensures your subwoofers deliver deep, distortion-free bass even under heavy loads. Let’s break down its compatibility and standout features.

Key Power Specifications Amplifier Morgan Sound X25.2

Subwoofers 218 and 221—typically high-power units used in professional setups—require an amplifier that can match their RMS ratings while providing headroom for dynamic peaks. The TD2.25’s ability to drive 5200W at 2Ω per channel or 9000W in bridge mode ensures it can handle even the most demanding low-frequency applications.

---

Technical Specifications That Make a Difference

The Morgan Sound X25.2 isn’t just about raw power—it’s built with advanced features to optimize performance with subwoofers like the 218 and 221. Here’s what sets it apart:

1. Wide Frequency Response and High Damping Factor

• Frequency Response: 20Hz – 20kHz (-1dB)
  Perfect for subwoofers, as it covers the critical low-end range (20Hz–200Hz) where the 218 and 221 excel.
• Damping Factor: >700 (1kHz, 8Ω)
  This ensures tight control over the subwoofer cones, reducing distortion and delivering punchy, accurate bass.

2. Class TD Efficiency

• The 4th Generation Class TD topology offers 80% efficiency at full power, minimizing heat buildup and maximizing energy transfer to your subwoofers.
• Paired with High-Speed High-Current MOSFETs, the MORGAN SOUND X25.2 provides rapid response times, crucial for reproducing fast bass transients.

3. Robust Protection System

• Features like Soft-Start, Short-Circuit Protection, and Smart Overhead Management (SOM) safeguard both the amplifier and your subwoofers during extended use.
• Operating voltage range of 180-250VAC ensures reliability in varying power conditions.

4. Cooling and Durability

• Front-to-back airflow with SUNON Maglev Fans (rated for 50,000 hours) keeps the unit cool during long sessions.
• FEA Optimized Radial Heat-Sink enhances heat dissipation, making it ideal for powering subwoofers in high-intensity environments.

---

Designed for Subwoofer 218 and 221: Real-World Compatibility

While exact specs for Subwoofer 218 and 221 may vary by manufacturer, these models are typically dual 18-inch or 21-inch drivers with RMS ratings between 1000W and 2000W and impedances of 4Ω or 8Ω. The Morgan Sound X25.2 aligns perfectly with these requirements:

• Stereo Mode: Drive each subwoofer independently with up to 2500W at 8Ω or 4000W at 4Ω per channel.
• Bridge Mode: Combine both subwoofers into a single load for a massive 8000W at 8Ω or 9000W at 4Ω—ideal for parallel configurations.

The TrueRMS VCA limiter and Ultra Low Noise design further ensure that the bass output remains clean and undistorted, even at peak volumes—a must for professional subwoofer applications.

---

Additional Features for Professional Audio Setups

Preamp and Power Supply

• Proprietary PureSound Circuit with audiophile-grade capacitors enhances audio clarity.
• Advanced Linear Power Supply with 105C Long-Life Capacitors guarantees stable performance over time.

Rear Panel Connectivity

• NEUTRIK XLR Inputs/Links and Speakon NL4 Outputs provide secure, industry-standard connections.
• Mode Switch (Stereo/Parallel/Bridge) offers flexibility for different subwoofer setups.

Super powerful product

• Dimensions: 19” 3U Height, 462mm Depth
• Weight: 42.5kg (net)
  Despite its power, the X25.2 remains rack-mountable and manageable for touring or fixed installations.

---

How to Optimize the amplifier MORGAN SOUND X25.2 with Subwoofer 218 and 221

To get the best performance:

1. Match Impedance: Check the subwoofers’ impedance (e.g., 4Ω or 8Ω) and configure the MORGAN SOUND X25.2 accordingly.
2. Set Sensitivity: Use the 0.775V / 1.4V / 32dB switch to align with your mixer or DSP output.
3. Wiring: Follow the Speakon wiring guide (SPK1: 1+ = CH A / 2+ = CH B. SPK2: 1+ = CH B / 2+ = Not Used) for correct connections.
4. Gain Control: Avoid overdriving by keeping gain within 1.5x–2x the subwoofers’ RMS rating.